ExamGuru IT/.Net Guru : Email on ASPFriends.com 'ngfx-mail' list

.NETGURU

Messages

Related Types

This message was discovered on ASPFriends.com 'ngfx-mail' list.

Glenn Gabe

-- Moved from [aspngfreeforall] to [ngfx-mail] by devin <Click here to reveal e-mail address> --

Hello everyone.

I'm learning asp.net and just tried to use the system.web.mail namespace
and received an error about security. I'm working through Wrox's
Beginning ASP.net using vb.net. In the book errata, they did address
the security issue and had instructions for setting "write" permissions
for the folder containing the code, but "write" was already selected.

Any ideas?

Thanks.

Glenn

Reply to this message...

Carlos Magalhaes

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2652.35">
<TITLE>RE: [ngfx-mail] Email</TITLE>
</HEAD>
<BODY>

Hi Glenn,


Can you show us the exact error?


Thanks


Carlos


 


-----Original Message-----
 From: Glenn Gabe [<A =
HREF=3D"mailto:Click here to reveal e-mail address">mailto:Click here to reveal e-mail address</A>] =

 Sent: Thursday, June 20, 2002 4:21 PM
 To: ngfx-mail
 Subject: [ngfx-mail] Email


-- Moved from [aspngfreeforall] to [ngfx-mail] by =
devin <Click here to reveal e-mail address> --


Hello everyone.


I'm learning asp.net and just tried to use the =
system.web.mail namespace
 and received an error about security. I'm =
working through Wrox's
 Beginning ASP.net using vb.net. In the book =
errata, they did address
 the security issue and had instructions for setting =
"write" permissions
 for the folder containing the code, but =
"write" was already selected.


Any ideas?


Thanks.


Glenn

 
 
 

| [ngfx-mail] member Click here to reveal e-mail address =3D YOUR =
ID
 | <A =
HREF=3D"http://www.aspfriends.com/aspfriends/ngfx-mail.asp" =
TARGET=3D"_blank">http://www.aspfriends.com/aspfriends/ngfx-mail.asp</A>=
=3D JOIN/QUIT


</BODY>
</HTML>

-------------------------------------------------------------
This email and any files transmitted are
confidential and intended solely for the
use of the individual or entity to which
they are addressed, whose privacy
should be respected. Any views or
opinions are solely those of the author
and do not necessarily represent those
of the Trencor Group, or any of its
representatives, unless specifically
stated.

Email transmission cannot be guaranteed
to be secure, error free or without virus
contamination. The sender therefore
accepts no liability for any errors or
omissions in the contents of this message,
nor for any virus infection that might result
from opening this message. Trencor is not
responsible in the event of any third party
interception of this email.

If you have received this email in error please notify
Click here to reveal e-mail address For more information about
Trencor, visit www.trencor.net <http://www.trencor.net>

Reply to this message...

Glenn Gabe

I don't have the code on this computer. I wrote a very basic snippet of
code that used "mailmessage". I set the to, from, subject, and body
properties.

Then I created a new smtpmail object, using my newly created mailmessage
as a parameter.

The error said something like the send using property wasn't set
correctly.

I wish I had the code here, but I'll try and rewrite it so I can email
it to you.

Do you know what the problem could be?

Glenn

-----Original Message-----
From: Carlos Magalhaes [mailto:Click here to reveal e-mail address]
Sent: Thursday, June 20, 2002 12:21 PM
To: ngfx-mail
Subject: [ngfx-mail] RE: Email

Hi Glenn,

Can you show us the exact error?

Thanks

Carlos

-----Original Message-----
From: Glenn Gabe [mailto:Click here to reveal e-mail address]
Sent: Thursday, June 20, 2002 4:21 PM
To: ngfx-mail
Subject: [ngfx-mail] Email

-- Moved from [aspngfreeforall] to [ngfx-mail] by devin
<Click here to reveal e-mail address> --

Hello everyone.

I'm learning asp.net and just tried to use the system.web.mail namespace

and received an error about security. I'm working through Wrox's
Beginning ASP.net using vb.net. In the book errata, they did address
the security issue and had instructions for setting "write" permissions
for the folder containing the code, but "write" was already selected.

Any ideas?

Thanks.

Glenn

| [ngfx-mail] member Click here to reveal e-mail address = YOUR ID
| http://www.aspfriends.com/aspfriends/ngfx-mail.asp = JOIN/QUIT

| [ngfx-mail] member Click here to reveal e-mail address = YOUR ID |
http://www.aspfriends.com/aspfriends/ngfx-mail.asp = JOIN/QUIT

------------------------------------------------------------- This email
and any files transmitted are confidential and intended solely for the
use of the individual or entity to which they are addressed, whose
privacy should be respected. Any views or opinions are solely those of
the author and do not necessarily represent those of the Trencor Group,
or any of its representatives, unless specifically stated. Email
transmission cannot be guaranteed to be secure, error free or without
virus contamination. The sender therefore accepts no liability for any
errors or omissions in the contents of this message, nor for any virus
infection that might result from opening this message. Trencor is not
responsible in the event of any third party interception of this email.
If you have received this email in error please notify
Click here to reveal e-mail address For more information about Trencor, visit
www.trencor.net

Reply to this message...

Sean Bytnar

There maybe a problem with the smtp server you are using.

-----Original Message-----
From: Glenn Gabe [mailto:Click here to reveal e-mail address]
Sent: Thursday, June 20, 2002 11:54 AM
To: ngfx-mail
Subject: [ngfx-mail] RE: Email

I don't have the code on this computer. I wrote a very basic snippet of
code that used "mailmessage". I set the to, from, subject, and body
properties.

Then I created a new smtpmail object, using my newly created mailmessage
as a parameter.

The error said something like the send using property wasn't set
correctly.

I wish I had the code here, but I'll try and rewrite it so I can email
it to you.

Do you know what the problem could be?

Glenn

-----Original Message-----
From: Carlos Magalhaes [mailto:Click here to reveal e-mail address]
Sent: Thursday, June 20, 2002 12:21 PM
To: ngfx-mail
Subject: [ngfx-mail] RE: Email

Hi Glenn,

Can you show us the exact error?

Thanks

Carlos

-----Original Message-----
From: Glenn Gabe [mailto:Click here to reveal e-mail address]
Sent: Thursday, June 20, 2002 4:21 PM
To: ngfx-mail
Subject: [ngfx-mail] Email

-- Moved from [aspngfreeforall] to [ngfx-mail] by devin
<Click here to reveal e-mail address> --

Hello everyone.

I'm learning asp.net and just tried to use the system.web.mail namespace

and received an error about security. I'm working through Wrox's
Beginning ASP.net using vb.net. In the book errata, they did address
the security issue and had instructions for setting "write" permissions
for the folder containing the code, but "write" was already selected.

Any ideas?

Thanks.

Glenn

| [ngfx-mail] member Click here to reveal e-mail address = YOUR ID
| http://www.aspfriends.com/aspfriends/ngfx-mail.asp = JOIN/QUIT

| [ngfx-mail] member Click here to reveal e-mail address = YOUR ID |
http://www.aspfriends.com/aspfriends/ngfx-mail.asp = JOIN/QUIT

| [ngfx-mail] member Click here to reveal e-mail address = YOUR ID |
http://www.aspfriends.com/aspfriends/ngfx-mail.asp = JOIN/QUIT
------------------------------------------------------------- This email
and any files transmitted are confidential and intended solely for the
use of the individual or entity to which they are addressed, whose
privacy should be respected. Any views or opinions are solely those of
the author and do not necessarily represent those of the Trencor Group,
or any of its representatives, unless specifically stated. Email
transmission cannot be guaranteed to be secure, error free or without
virus contamination. The sender therefore accepts no liability for any
errors or omissions in the contents of this message, nor for any virus
infection that might result from opening this message. Trencor is not
responsible in the event of any third party interception of this email.
If you have received this email in error please notify
Click here to reveal e-mail address For more information about Trencor, visit
www.trencor.net

Reply to this message...

Peter Brunone

RE: [ngfx-mail] Email
That doesn't sound like security at all; it sounds like you just need to
explicitly set the SMTP server that you're going to use
(SmtpMail.SmtpServer). This is a change from the Beta 2; even if it's just
localhost, you have to set that property.

-Peter
-----Original Message-----
From: Glenn Gabe [mailto:Click here to reveal e-mail address]
Sent: Thursday, June 20, 2002 11:54 AM
To: ngfx-mail
Subject: [ngfx-mail] RE: Email

I don't have the code on this computer. I wrote a very basic snippet of
code that used "mailmessage". I set the to, from, subject, and body
properties.

Then I created a new smtpmail object, using my newly created mailmessage
as a parameter.

The error said something like the send using property wasn't set
correctly.

I wish I had the code here, but I'll try and rewrite it so I can email it
to you.

Do you know what the problem could be?

Glenn

-----Original Message-----
From: Carlos Magalhaes [mailto:Click here to reveal e-mail address]
Sent: Thursday, June 20, 2002 12:21 PM
To: ngfx-mail
Subject: [ngfx-mail] RE: Email

Hi Glenn,

Can you show us the exact error?

Thanks

Carlos

-----Original Message-----
From: Glenn Gabe [mailto:Click here to reveal e-mail address]
Sent: Thursday, June 20, 2002 4:21 PM
To: ngfx-mail
Subject: [ngfx-mail] Email

-- Moved from [aspngfreeforall] to [ngfx-mail] by devin
<Click here to reveal e-mail address> --

Hello everyone.

I'm learning asp.net and just tried to use the system.web.mail namespace
and received an error about security. I'm working through Wrox's
Beginning ASP.net using vb.net. In the book errata, they did address
the security issue and had instructions for setting "write" permissions
for the folder containing the code, but "write" was already selected.

Any ideas?

Thanks.

Glenn

| [ngfx-mail] member Click here to reveal e-mail address = YOUR ID
| http://www.aspfriends.com/aspfriends/ngfx-mail.asp = JOIN/QUIT

| [ngfx-mail] member Click here to reveal e-mail address = YOUR ID |
http://www.aspfriends.com/aspfriends/ngfx-mail.asp = JOIN/QUIT

| [ngfx-mail] member Click here to reveal e-mail address = YOUR ID |
http://www.aspfriends.com/aspfriends/ngfx-mail.asp JOIN/QUIT ------------------------------------------------------------- This
email and any files transmitted are confidential and intended solely for the
use of the individual or entity to which they are addressed, whose privacy
should be respected. Any views or opinions are solely those of the author
and do not necessarily represent those of the Trencor Group, or any of its
representatives, unless specifically stated. Email transmission cannot be
guaranteed to be secure, error free or without virus contamination. The
sender therefore accepts no liability for any errors or omissions in the
contents of this message, nor for any virus infection that might result from
opening this message. Trencor is not responsible in the event of any third
party interception of this email. If you have received this email in error
please notify Click here to reveal e-mail address For more information about Trencor,
visit www.trencor.net

Reply to this message...

Carlos Magalhaes

Well , you telling us very little so we would be taking educated guesses
here is two that I can think of ...

1. The user account which the application is running under on the web
server might not have permissions on the SMTP server you are trying to relay
mail off.
2. You might have not set a proper smtp server and/or might not have
executed the send mail property correctly.

Here is some code that will fix the above.

Specifying the CORRECT smtp server you would put this just after you declare
the mail object

e.g.

Imports System.Web.Mail (0r if you using c++) using system.web.mail;

Then (this will be in VB.net)

Dim mail as New MailMessage() ' declaring the new mail object

'Then you would put this to specify the correct smtp server

SmtpMail.SmtpServer = "MySMTP.SMTP.com"

'That would make sure it would direct it to the correct smtp mail server and
not the default(which is the web servers smtp if you running IIS 5 and
above) smtp server.

'Then at the end of the code where you would have

mail.to "Click here to reveal e-mail address"

mail.from "Click here to reveal e-mail address

mail.body "Hello World"

'here is the important part to execute the mail object to the smtp server

SmtpMail.Send(mail) ' REMEMBER that mail is what I declared to be the New
MailMessage(Dim mail as New MailMessage) you would use what ever you
declared as the mail object.

HTH

Let me know

Carlos M

-----Original Message-----
From: Glenn Gabe [mailto:Click here to reveal e-mail address]
Sent: Thursday, June 20, 2002 6:54 PM
To: ngfx-mail
Subject: [ngfx-mail] RE: Email

I don't have the code on this computer. I wrote a very basic snippet of
code that used "mailmessage". I set the to, from, subject, and body
properties.

Then I created a new smtpmail object, using my newly created mailmessage as
a parameter.

The error said something like the send using property wasn't set correctly.

I wish I had the code here, but I'll try and rewrite it so I can email it to
you.

Do you know what the problem could be?

Glenn

-----Original Message-----
From: Carlos Magalhaes [mailto:Click here to reveal e-mail address]
Sent: Thursday, June 20, 2002 12:21 PM
To: ngfx-mail
Subject: [ngfx-mail] RE: Email

Hi Glenn,

Can you show us the exact error?

Thanks

Carlos

-----Original Message-----
From: Glenn Gabe [mailto:Click here to reveal e-mail address <mailto:Click here to reveal e-mail address> ]
Sent: Thursday, June 20, 2002 4:21 PM
To: ngfx-mail
Subject: [ngfx-mail] Email

-- Moved from [aspngfreeforall] to [ngfx-mail] by devin
<Click here to reveal e-mail address> --

Hello everyone.

I'm learning asp.net and just tried to use the system.web.mail namespace
and received an error about security. I'm working through Wrox's
Beginning ASP.net using vb.net. In the book errata, they did address
the security issue and had instructions for setting "write" permissions
for the folder containing the code, but "write" was already selected.

Any ideas?

Thanks.

Glenn

| [ngfx-mail] member Click here to reveal e-mail address = YOUR ID
| http://www.aspfriends.com/aspfriends/ngfx-mail.asp
<http://www.aspfriends.com/aspfriends/ngfx-mail.asp> = JOIN/QUIT

| [ngfx-mail] member Click here to reveal e-mail address = YOUR ID |
http://www.aspfriends.com/aspfriends/ngfx-mail.asp = JOIN/QUIT

| [ngfx-mail] member Click here to reveal e-mail address = YOUR ID |
http://www.aspfriends.com/aspfriends/ngfx-mail.asp = JOIN/QUIT

------------------------------------------------------------- This email and
any files transmitted are confidential and intended solely for the use of
the individual or entity to which they are addressed, whose privacy should
be respected. Any views or opinions are solely those of the author and do
not necessarily represent those of the Trencor Group, or any of its
representatives, unless specifically stated. Email transmission cannot be
guaranteed to be secure, error free or without virus contamination. The
sender therefore accepts no liability for any errors or omissions in the
contents of this message, nor for any virus infection that might result from
opening this message. Trencor is not responsible in the event of any third
party interception of this email. If you have received this email in error
please notify Click here to reveal e-mail address For more information about Trencor,
visit www.trencor.net

-------------------------------------------------------------
This email and any files transmitted are
confidential and intended solely for the
use of the individual or entity to which
they are addressed, whose privacy
should be respected. Any views or
opinions are solely those of the author
and do not necessarily represent those
of the Trencor Group, or any of its
representatives, unless specifically
stated.

Email transmission cannot be guaranteed
to be secure, error free or without virus
contamination. The sender therefore
accepts no liability for any errors or
omissions in the contents of this message,
nor for any virus infection that might result
from opening this message. Trencor is not
responsible in the event of any third party
interception of this email.

If you have received this email in error please notify
Click here to reveal e-mail address For more information about
Trencor, visit www.trencor.net <http://www.trencor.net>

Reply to this message...

Glenn Gabe

Thanks Carlos! I'll give it a try.

I'll let you know if I have any problems.

Glenn

-----Original Message-----
From: Carlos Magalhaes [mailto:Click here to reveal e-mail address]
Sent: Thursday, June 20, 2002 2:41 PM
To: ngfx-mail
Subject: [ngfx-mail] RE: Email

Well , you telling us very little so we would be taking educated guesses
here is two that I can think of ...

1. The user account which the application is running under on the
web
server might not have permissions on the SMTP server you are trying to
relay
mail off.
2. You might have not set a proper smtp server and/or might not
have
executed the send mail property correctly.

Here is some code that will fix the above.

Specifying the CORRECT smtp server you would put this just after you
declare
the mail object

e.g.

Imports System.Web.Mail (0r if you using c++) using system.web.mail;

Then (this will be in VB.net)

Dim mail as New MailMessage() ' declaring the new mail object

'Then you would put this to specify the correct smtp server

SmtpMail.SmtpServer = "MySMTP.SMTP.com"

'That would make sure it would direct it to the correct smtp mail server
and
not the default(which is the web servers smtp if you running IIS 5 and
above) smtp server.

'Then at the end of the code where you would have

mail.to "Click here to reveal e-mail address"

mail.from "Click here to reveal e-mail address

mail.body "Hello World"

'here is the important part to execute the mail object to the smtp
server

SmtpMail.Send(mail) ' REMEMBER that mail is what I declared to be the
New
MailMessage(Dim mail as New MailMessage) you would use what ever you
declared as the mail object.

HTH

Let me know

Carlos M

-----Original Message-----
From: Glenn Gabe [mailto:Click here to reveal e-mail address]
Sent: Thursday, June 20, 2002 6:54 PM
To: ngfx-mail
Subject: [ngfx-mail] RE: Email

I don't have the code on this computer. I wrote a very basic snippet of
code that used "mailmessage". I set the to, from, subject, and body
properties.

Then I created a new smtpmail object, using my newly created mailmessage
as
a parameter.

The error said something like the send using property wasn't set
correctly.

I wish I had the code here, but I'll try and rewrite it so I can email
it to
you.

Do you know what the problem could be?

Glenn

-----Original Message-----
From: Carlos Magalhaes [mailto:Click here to reveal e-mail address]
Sent: Thursday, June 20, 2002 12:21 PM
To: ngfx-mail
Subject: [ngfx-mail] RE: Email

Hi Glenn,

Can you show us the exact error?

Thanks

Carlos

-----Original Message-----
From: Glenn Gabe [mailto:Click here to reveal e-mail address
<mailto:Click here to reveal e-mail address> ]
Sent: Thursday, June 20, 2002 4:21 PM
To: ngfx-mail
Subject: [ngfx-mail] Email

-- Moved from [aspngfreeforall] to [ngfx-mail] by devin
<Click here to reveal e-mail address> --

Hello everyone.

I'm learning asp.net and just tried to use the system.web.mail namespace

and received an error about security. I'm working through Wrox's
Beginning ASP.net using vb.net. In the book errata, they did address
the security issue and had instructions for setting "write" permissions
for the folder containing the code, but "write" was already selected.

Any ideas?

Thanks.

Glenn

| [ngfx-mail] member Click here to reveal e-mail address = YOUR ID
| http://www.aspfriends.com/aspfriends/ngfx-mail.asp
<http://www.aspfriends.com/aspfriends/ngfx-mail.asp> = JOIN/QUIT

| [ngfx-mail] member Click here to reveal e-mail address = YOUR ID |
http://www.aspfriends.com/aspfriends/ngfx-mail.asp = JOIN/QUIT

| [ngfx-mail] member Click here to reveal e-mail address = YOUR ID |
http://www.aspfriends.com/aspfriends/ngfx-mail.asp = JOIN/QUIT

------------------------------------------------------------- This email
and
any files transmitted are confidential and intended solely for the use
of
the individual or entity to which they are addressed, whose privacy
should
be respected. Any views or opinions are solely those of the author and
do
not necessarily represent those of the Trencor Group, or any of its
representatives, unless specifically stated. Email transmission cannot
be
guaranteed to be secure, error free or without virus contamination. The
sender therefore accepts no liability for any errors or omissions in the
contents of this message, nor for any virus infection that might result
from
opening this message. Trencor is not responsible in the event of any
third
party interception of this email. If you have received this email in
error
please notify Click here to reveal e-mail address For more information about Trencor,
visit www.trencor.net

-------------------------------------------------------------
This email and any files transmitted are
confidential and intended solely for the
use of the individual or entity to which
they are addressed, whose privacy
should be respected. Any views or
opinions are solely those of the author
and do not necessarily represent those
of the Trencor Group, or any of its
representatives, unless specifically
stated.

Email transmission cannot be guaranteed
to be secure, error free or without virus
contamination. The sender therefore
accepts no liability for any errors or
omissions in the contents of this message,
nor for any virus infection that might result
from opening this message. Trencor is not
responsible in the event of any third party
interception of this email.

If you have received this email in error please notify
Click here to reveal e-mail address For more information about
Trencor, visit www.trencor.net <http://www.trencor.net>

Reply to this message...

	System.Web.Mail.MailMessage
	System.Web.Mail.SmtpMail

ExamGuru IT Solutions - .Net Guru is owned and operated by ExamGuru, Inc., the man behind .Net Guru. If you're in the market for bespoke software or software consultancy, why not get him and his highly trained team to help? - www.examguru.net/ITCertification

Need Dot Net Interview Questions?
Ask ExamGuru, Inc. for advice and help on Passing .Net Interviews

.Net Projects
Best-of-breed application framework for .NET projects, developed by ExamGuru, Inc. and ExamGuru IT

Free .net Help
Commission ExamGuru, Inc. and his team for your next bespoke software project

FogBUGZ
The only bug tracking system carefully crafted with one goal in mind: helping teams create great software.

Awesome Tools
If you don't know about these, you're missing out... IT Certification Questions
IT Interview Questions
Free Oracle 10g Training
MCSE Boortcamp
Cisco Study Guides
Cheap Study Guides
Exact Questions
Dot Net Interview Questions
Oracle OCP
Cheap Travel
Designer Perfumes - Wholesale Prices
Free Programming Tutorials

	Copyright © ExamGuru, Inc. 2001-2006
	Contact Us - Terms of Use - Privacy Policy - www.dot-net-guru.com - www.examguru.net - www.oraclesource.net - www.itinterviews.net - www.examguru.net/ITCertification