ExamGuru IT/.Net Guru : .Net report on ASPFriends.com 'ngfx-crystal' list

.NETGURU

.Net report

Messages

Related Types

This message was discovered on ASPFriends.com 'ngfx-crystal' list.

Carlos Magalhaes

Hi all,

I had a Crystal 8 rpt that I edited in Crystal.Net I saved it , now when I
try and open it in Ver 8 it does not want to open is there any way of doing
a save as (then selecting Ver8?)

Regards,

Carlos Magalhaes

-------------------------------------------------------------
This email and any files transmitted are
confidential and intended solely for the
use of the individual or entity to which
they are addressed, whose privacy
should be respected. Any views or
opinions are solely those of the author
and do not necessarily represent those
of the Trencor Group, or any of its
representatives, unless specifically
stated.

Email transmission cannot be guaranteed
to be secure, error free or without virus
contamination. The sender therefore
accepts no liability for any errors or
omissions in the contents of this message,
nor for any virus infection that might result
from opening this message. Trencor is not
responsible in the event of any third party
interception of this email.

If you have received this email in error please notify
Click here to reveal e-mail address For more information about
Trencor, visit www.trencor.net <http://www.trencor.net>

Reply to this message...

Tim Musschoot

Did you check the Crystal Reports .NET faq on the website ?

-----Oorspronkelijk bericht-----
Van: Carlos Magalhaes [mailto:Click here to reveal e-mail address]
Verzonden: donderdag 15 augustus 2002 10:52
Aan: ngfx-crystal
Onderwerp: [ngfx-crystal] .Net report

Hi all,

I had a Crystal 8 rpt that I edited in Crystal.Net I saved it , now when
I try and open it in Ver 8 it does not want to open is there any way of
doing a save as (then selecting Ver8?)

Regards,

Carlos Magalhaes

-------------------------------------------------------------
This email and any files transmitted are
confidential and intended solely for the
use of the individual or entity to which
they are addressed, whose privacy
should be respected. Any views or
opinions are solely those of the author
and do not necessarily represent those
of the Trencor Group, or any of its
representatives, unless specifically
stated.

Email transmission cannot be guaranteed
to be secure, error free or without virus
contamination. The sender therefore
accepts no liability for any errors or
omissions in the contents of this message,
nor for any virus infection that might result
from opening this message. Trencor is not
responsible in the event of any third party
interception of this email.

If you have received this email in error please notify
Click here to reveal e-mail address For more information about
Trencor, visit www.trencor.net <http://www.trencor.net>

Reply to this message...

aaa

Hi all I have similar issue but a little different.
I have a problem with viewing my report in vs.NET. First I used crystal reportview control and then I coded hoping that would resolve an issue. But none worked that is it would still print blank page and issue no error. I know crystal view in .net has many issue but this one is unheard. Anyone had similiar issue, what did you do? Thank you before hand

--------------------------------
From: aaa ash

Reply to this message...

Carlos Magalhaes

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3DUS-ASCII">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2652.35">
<TITLE>RE: [ngfx-crystal] RE: .Net report</TITLE>
</HEAD>
<BODY>

What web site?


Regards,
 Carlos Magalhaes

 

-----Original Message-----
 From: Tim Musschoot [<A =
HREF=3D"mailto:Click here to reveal e-mail address">mailto:Click here to reveal e-mail address</=
A>] 
 Sent: Thursday, August 15, 2002 11:18 AM
 To: ngfx-crystal
 Subject: [ngfx-crystal] RE: .Net report


Did you check the Crystal Reports .NET faq on the =
website ?


-----Oorspronkelijk bericht-----
 Van: Carlos Magalhaes [<A =
HREF=3D"mailto:Click here to reveal e-mail address">mailto:Click here to reveal e-mail address</A>] =

 Verzonden: donderdag 15 augustus 2002 10:52
 Aan: ngfx-crystal
 Onderwerp: [ngfx-crystal] .Net report

 

Hi all,


 


I had a Crystal 8 rpt that I edited in Crystal.Net I =
saved it , now when
 I try and open it in Ver 8 it does not want to open =
is there any way of
 doing a save as (then selecting Ver8?)


 


Regards,


Carlos Magalhaes


 

 
 

-------------------------------------------------------------</=
FONT>
 This email and any files transmitted are
 confidential and intended solely for the
 use of the individual or entity to which
 they are addressed, whose privacy
 should be respected. Any views or
 opinions are solely those of the author
 and do not necessarily represent those
 of the Trencor Group, or any of its
 representatives, unless specifically
 stated. 


Email transmission cannot be guaranteed
 to be secure, error free or without virus
 contamination. The sender therefore
 accepts no liability for any errors or
 omissions in the contents of this message,
 nor for any virus infection that might result
 from opening this message. Trencor is =
not
 responsible in the event of any third party
 interception of this email. 


If you have received this email in error please =
notify
 Click here to reveal e-mail address For more =
information about
 Trencor, visit www.trencor.net <<A =
HREF=3D"http://www.trencor.net" =
TARGET=3D"_blank">http://www.trencor.net</A>>

 

| [ngfx-crystal] member Click here to reveal e-mail address =3D YOUR =
ID
 | <A =
HREF=3D"http://www.aspfriends.com/aspfriends/ngfx-crystal.asp"" target="_blank">http://www.aspfriends.com/aspfriends/ngfx-crystal.asp"; =
TARGET=3D"_blank">http://www.aspfriends.com/aspfriends/ngfx-crystal.asp<=
/A> =3D JOIN/QUIT


</BODY>
</HTML>

-------------------------------------------------------------
This email and any files transmitted are
confidential and intended solely for the
use of the individual or entity to which
they are addressed, whose privacy
should be respected. Any views or
opinions are solely those of the author
and do not necessarily represent those
of the Trencor Group, or any of its
representatives, unless specifically
stated.

Email transmission cannot be guaranteed
to be secure, error free or without virus
contamination. The sender therefore
accepts no liability for any errors or
omissions in the contents of this message,
nor for any virus infection that might result
from opening this message. Trencor is not
responsible in the event of any third party
interception of this email.

If you have received this email in error please notify
Click here to reveal e-mail address For more information about
Trencor, visit www.trencor.net <http://www.trencor.net>

Reply to this message...

Johnson, Peter

CrystalDecisions.com

That's the company that created and supports Crystal Reports .NET.

Tim, I went to
http://support.crystaldecisions.com/library/
and chose Crystal Reports, .NET, and FAQ, and it said no documents matched.
Do you have the URL?

--Peter

-----Original Message-----
From: Carlos Magalhaes [mailto:Click here to reveal e-mail address]

What web site?

Regards,
Carlos Magalhaes

-----Original Message-----
From: Tim Musschoot [mailto:Click here to reveal e-mail address]

Did you check the Crystal Reports .NET faq on the website ?

-----Oorspronkelijk bericht-----
Van: Carlos Magalhaes [mailto:Click here to reveal e-mail address]

Hi all,

I had a Crystal 8 rpt that I edited in Crystal.Net I saved it , now when
I try and open it in Ver 8 it does not want to open is there any way of
doing a save as (then selecting Ver8?)

Regards,
Carlos Magalhaes
__

**********************************************
This e-mail and any attachments may be confidential or legally privileged.
If you received this message in error or are not the intended recipient, you
should destroy the e-mail message and any attachments or copies, and you are
prohibited from retaining, distributing disclosing or using any information
contained herein. Please inform us of the erroneous delivery by return
e-mail. Thank you for your cooperation.
**********************************************

ec03/04

Reply to this message...

ExamGuru IT Solutions - .Net Guru is owned and operated by ExamGuru, Inc., the man behind .Net Guru. If you're in the market for bespoke software or software consultancy, why not get him and his highly trained team to help? - www.examguru.net/ITCertification

Need Dot Net Interview Questions?
Ask ExamGuru, Inc. for advice and help on Passing .Net Interviews

.Net Projects
Best-of-breed application framework for .NET projects, developed by ExamGuru, Inc. and ExamGuru IT

Free .net Help
Commission ExamGuru, Inc. and his team for your next bespoke software project

FogBUGZ
The only bug tracking system carefully crafted with one goal in mind: helping teams create great software.

Awesome Tools
If you don't know about these, you're missing out... IT Certification Questions
IT Interview Questions
Free Oracle 10g Training
MCSE Boortcamp
Cisco Study Guides
Cheap Study Guides
Exact Questions
Dot Net Interview Questions
Oracle OCP
Cheap Travel
Designer Perfumes - Wholesale Prices
Free Programming Tutorials

	Copyright © ExamGuru, Inc. 2001-2006
	Contact Us - Terms of Use - Privacy Policy - www.dot-net-guru.com - www.examguru.net - www.oraclesource.net - www.itinterviews.net - www.examguru.net/ITCertification